Turn your Push 3 into a standalone instrument in just 30 minutes, following our step-by-step guide.
Contents: āØIntelĀ® 11th Gen Coreā¢ļø i3-1115G4 processor with 8GB of RAM and 2x WiFi antennas, lithium iron phosphate battery, 256GB SSD hard drive, heatsink, and all the tools and screws required for assembly.
Shipping weight: 1.8 kgāØ
Dimensions: 383 x 218 x 84 mm
74 Creative Strategies for Electronic Music Producers. A book by Dennis DeSantis.
Download for free in the following formats: .pdf, .mobi (for Kindle), .epub (for all devices).
Also available on Amazon Kindle and Apple Books.
Published by Ableton
340 pages, hardcover
ISBN: 978-3-9817165-0-4
Use your Ableton hardware as a control surface for Live on a computer by connecting it via USB.
Specifications:
USB-C to USB-C cable
Length: 100 cm / 39 in
Use the Push MIDI Adapterās 5-pin MIDI jack to send or receive MIDI data from an external instrument.
3.5 mm plug to Type A 5-pin MIDI jack
Compliant with the MIDI Manufacturers Association TRS MIDI Specification.
Length: 23 cm / 9 in
Use the Push CV adapter to send CV from Push's pedal ports to your modular gear. With two adapters you can send up to four CV signals from Push.
Single 6.3 mm TRS plug to dual 3.5 mm TS jacks.
Length: 23 cm / 9 in
This USB splitter cable can be used as an accessory for Ableton products that feature a single USB-C port for both data and power. It allows you to simultaneously charge the device with its original power supply while connecting it to a low-powered USB computer port.
This USB splitter cable is exclusively to be used with Ableton products and is not compatible with other devices.
It is not possible to charge the battery in the model Push standalone with this splitter cable.
Specifications: Connector A - USB-C Male (connected to Ableton hardware acting as USB Device)
Connector A - USB-C Female (connected to USB power supply)
Connector C - USB-C Female (USB 2.0 Data Transfer to USB Host)
Length: 15cm
Specifications:
Four Encoder Knobs
Height: 1.5 cm / 0.59 in
Diameter: 1.2 cm / 0.47 in
One Volume Knob. Height: 1 cm / 0.39, Diameter: 2.4 cm / 0.94 in.
Specifications:
One Swing & Tempo Knob
Height: 1 cm / 0.39
Diameter: 1.6 cm / 0.63 in
Specifications: One Control Wheel
Height: 9 cm Diameter: 2.6 cm
Specifications: Four Move Encoder Knobs
Height: 1.5 cm Diameter: 1.1 cm
Specifications: One Move Volume Knob
Height: 1.5 cm Diameter: 1.4 cm
Connect Push to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Supply Base only works in combination with a Power Cable (sold separately).
Specifications:
Input: 100-240 V ~50/60 Hz, 2.0 A
Output: 20 V --- 3250 mA
C8 connector; non-polarized
Length: 150 cm / 59 in.
The Power Supply Base is included in the Push 3 box.
Connect to external power to charge the battery, use the instrument in standalone mode, or increase the brightness of the pads and display while connected to a computer.
Please note: the Power Cable only works in combination with the Power Supply Base (sold separately).
Specifications:
Type A plug to C7 connector; non-polarized
Length: 150 cm / 59 in
One regional Power Cable is included in the box.
Connect Move to external power to charge the battery. Please note: this Power Supply Base only works in combination with a Power Cable (sold separately)
Specifications: Input: 100-240V ~50/60Hz, 0.5A. Output: 5V --- 3000mA. C8 connector; unpolarized Length: 145 cm / 57 inches
This Power Supply Base is included in the Move box by default.
Black Ableton logo on front, small "Ableton" on back. 85% cotton, 15% viscose, regular fit.
White Ableton logo on front, small "Ableton" on back. 100% cotton, regular fit.
Black Ableton logo on front, small "Ableton" on back. 85% cotton, 15% viscose, classic cut.
White Ableton logo on front. 50% cotton, 50% polyester.
Black Ableton logo on front. 80% cotton, 20% polyester.
Length 1.50m, 100-240VAC, 50/60Hz including 5 interchangeable adaptor tips for North/Central America & Japan, China, Europe, UK, Australia & New Zealand
Length 1.40m, Ableton logo on right-angle connector
Use the Push Adapter Bundle to easily connect Push to multiple pieces of MIDI and CV-compatible gear. Send MIDI data to or from even more devices with the bundleās two MIDI Adapters, and transmit up to four CV signals using the two CV Adapters.