To Yamaha 01x and Mackie Control users
To Yamaha 01x and Mackie Control users
Oye there,
you are invited to try out MC Commander for Live beta, and your feedback is much appreciated. MCCL is free, and runs on PC under Windows. See features below. To get it, hop to the user group at http://groups.yahoo.com/group/mcclive.
Stay safe,
Jajah
snip from readme.txt:
MC Commander for Live
Version 1.0 beta 1
--------------------------------------------------------------------------------
Description
--------------------------------------------------------------------------------
MC Commander for Live (a.k.a MCCL) enhances the functionality of control surfaces supporting the Mackie Control protocol, when they are used in conjunction with Live sequencer software from Ableton, as this latter doesn´t yet implement this protocol. Typically, it enables you to control many more sequencer tracks than you could with just connecting your control surface to Live. It streams clean feedback from Live to the remote LCD screen and LEDs, and can help correct some motorfaders issues. It maintains a two-way state synchronization between most of the remoted controls.
--------------------------------------------------------------------------------
Sytem requirements
--------------------------------------------------------------------------------
Tested devices and softs are in (). Please provide more tested platform components via the MCCL group.
-PC under MS Windows (XP Pro SP1).
-Mackie Control compatible MIDI control surface (Yamaha 01x).
-Virtual shared MIDI ports (MIDI Yoke)
-Ableton Live sequencer (v4.0.1)
--------------------------------------------------------------------------------
Features
--------------------------------------------------------------------------------
-Remote control up to 64 tracks.
-LCD screen track numbers and parameter names/values printout, button LEDs feedback.
-Most of the remote controls stay in sync when tweaked directly in Live.
-Controls for each track: gain, pan, sends (up to 8 ), mute, solo/cue, record arm, fade group, track select, track clip play/stop.
-Main track controls: main gain, cue gain, crossfade, scroll scenes, select next/previous scene, scene play, stop all clips.
-Global controls: Tap, tempo, groove, metronome, follow, play/stop/record, MIDI overdub, back to arrange, draw mode, loop, punch in/out
-Useful extra functionnality: anymute/anysolo/anyarm/anygroup feedback, mute/unmute all, solo/unsolo all, arm/unarm all, group/ungroup all, reset mix.
-No hacking, just plain Live MIDI remote functionality is being used.
-Extremely small footprint, under 0.01ms MIDI latency added on a PIII 1Ghz.
--------------------------------------------------------------------------------
Limitations
--------------------------------------------------------------------------------
Track record arm and group assign switches are not synchronized on the remote if changed within Live. They must be reset to a state coherent with the remote within Live itself (mostly a one click job).
you are invited to try out MC Commander for Live beta, and your feedback is much appreciated. MCCL is free, and runs on PC under Windows. See features below. To get it, hop to the user group at http://groups.yahoo.com/group/mcclive.
Stay safe,
Jajah
snip from readme.txt:
MC Commander for Live
Version 1.0 beta 1
--------------------------------------------------------------------------------
Description
--------------------------------------------------------------------------------
MC Commander for Live (a.k.a MCCL) enhances the functionality of control surfaces supporting the Mackie Control protocol, when they are used in conjunction with Live sequencer software from Ableton, as this latter doesn´t yet implement this protocol. Typically, it enables you to control many more sequencer tracks than you could with just connecting your control surface to Live. It streams clean feedback from Live to the remote LCD screen and LEDs, and can help correct some motorfaders issues. It maintains a two-way state synchronization between most of the remoted controls.
--------------------------------------------------------------------------------
Sytem requirements
--------------------------------------------------------------------------------
Tested devices and softs are in (). Please provide more tested platform components via the MCCL group.
-PC under MS Windows (XP Pro SP1).
-Mackie Control compatible MIDI control surface (Yamaha 01x).
-Virtual shared MIDI ports (MIDI Yoke)
-Ableton Live sequencer (v4.0.1)
--------------------------------------------------------------------------------
Features
--------------------------------------------------------------------------------
-Remote control up to 64 tracks.
-LCD screen track numbers and parameter names/values printout, button LEDs feedback.
-Most of the remote controls stay in sync when tweaked directly in Live.
-Controls for each track: gain, pan, sends (up to 8 ), mute, solo/cue, record arm, fade group, track select, track clip play/stop.
-Main track controls: main gain, cue gain, crossfade, scroll scenes, select next/previous scene, scene play, stop all clips.
-Global controls: Tap, tempo, groove, metronome, follow, play/stop/record, MIDI overdub, back to arrange, draw mode, loop, punch in/out
-Useful extra functionnality: anymute/anysolo/anyarm/anygroup feedback, mute/unmute all, solo/unsolo all, arm/unarm all, group/ungroup all, reset mix.
-No hacking, just plain Live MIDI remote functionality is being used.
-Extremely small footprint, under 0.01ms MIDI latency added on a PIII 1Ghz.
--------------------------------------------------------------------------------
Limitations
--------------------------------------------------------------------------------
Track record arm and group assign switches are not synchronized on the remote if changed within Live. They must be reset to a state coherent with the remote within Live itself (mostly a one click job).
Mac version?!?!?
I am staring at my 01x as I type this and would love to control more than just the transport functions in LIVE 4 in OSX.
Any chance that this will be ported to Mac any time soon? I'll bet a ton of Mac users would love this as well.
Thanks.
nz
Any chance that this will be ported to Mac any time soon? I'll bet a ton of Mac users would love this as well.
Thanks.
nz
MacBook Pro/Mac Mini
Ableton Live 10
Ableton Live 10
Oye NZ,
I have been aware of a potential Mac users frustration the minute I decided to publish MCCL, and I sincerely wish I was able to help right away . But I started to write this program for my own use, in a language unfortunately not available on Mac, chosen for prototyping speed and robustness. Though, now that the concept and design are stabilized, and if I feel that there is sufficient demand, I will gladly re-write it in C++ for an easier port to Mac. Yet, then I´ll need either a Mac myself, or help from a cool soul with Mac programming skills to write the port.
In short, a Mac port is in the pipe.
Stay safe,
Jajah
I have been aware of a potential Mac users frustration the minute I decided to publish MCCL, and I sincerely wish I was able to help right away . But I started to write this program for my own use, in a language unfortunately not available on Mac, chosen for prototyping speed and robustness. Though, now that the concept and design are stabilized, and if I feel that there is sufficient demand, I will gladly re-write it in C++ for an easier port to Mac. Yet, then I´ll need either a Mac myself, or help from a cool soul with Mac programming skills to write the port.
In short, a Mac port is in the pipe.
Stay safe,
Jajah
MCCL Beta 2 is online.
http://groups.yahoo.com/group/mcclive/
Feedback wanted, enjoy.
Jajah
--------------------------------------------------------------------------------
Change log
--------------------------------------------------------------------------------
v1.0 beta 2:
-Custom track names management implemented.
-Better dynamic MIDI devices management (eg USB, mLAN/FireWire)
http://groups.yahoo.com/group/mcclive/
Feedback wanted, enjoy.
Jajah
--------------------------------------------------------------------------------
Change log
--------------------------------------------------------------------------------
v1.0 beta 2:
-Custom track names management implemented.
-Better dynamic MIDI devices management (eg USB, mLAN/FireWire)
Mackie Control
Sup Jajah?
I'm looking forward to testing out your MCCL beta tonite. All of your thorough documentation is commendable, but I do have a question stemming from your readme txt.
Where you state "-Click Ok, make sure your control surface is connected and ready (an 01x needs to be in "Remote" mode, with the "REMOTE" parameter of the "UTILITY" page set to "GENERAL")." I'm ignorant as to how to set my MC to remote mode or how to find my "utility" page.
T.I.A. & keep up the good work
I'm looking forward to testing out your MCCL beta tonite. All of your thorough documentation is commendable, but I do have a question stemming from your readme txt.
Where you state "-Click Ok, make sure your control surface is connected and ready (an 01x needs to be in "Remote" mode, with the "REMOTE" parameter of the "UTILITY" page set to "GENERAL")." I'm ignorant as to how to set my MC to remote mode or how to find my "utility" page.
T.I.A. & keep up the good work
Jondough,
this release is still very much 01x-tainted, so a) don't search for a REMOTE parameter on your Mackie, that's the one and only mode it has (the 01x is also a standalone digimixer). b) don't expect things to work (yet) as intended on a Mackie, sorry =/ check the doc or readme at "Known bugs".
I'm working on it, next beta is definitely aimed at MC owners, and will be available very soon. Though, I'd like to take a bit of time to discuss and plan accordingly a general control layout that would fit for all, not just 01x. So your input is very important, check the user group often and post your ideas.
Stay safe,
Jajah
this release is still very much 01x-tainted, so a) don't search for a REMOTE parameter on your Mackie, that's the one and only mode it has (the 01x is also a standalone digimixer). b) don't expect things to work (yet) as intended on a Mackie, sorry =/ check the doc or readme at "Known bugs".
I'm working on it, next beta is definitely aimed at MC owners, and will be available very soon. Though, I'd like to take a bit of time to discuss and plan accordingly a general control layout that would fit for all, not just 01x. So your input is very important, check the user group often and post your ideas.
Stay safe,
Jajah
Hiho,
I'm glad there's interest in the matter. I've been busy elsewhere in the last couple of months, but I put MCCL back on the workbench a few days ago, and tied myself to the chair. Great things coming, including for Microkontrol users (or any MIDI controler really).
Register on MCCL's webpage to stay tuned (no spam), input much appreciated.
http://groups.yahoo.com/group/mcclive/
Stay safe,
Jajah
I'm glad there's interest in the matter. I've been busy elsewhere in the last couple of months, but I put MCCL back on the workbench a few days ago, and tied myself to the chair. Great things coming, including for Microkontrol users (or any MIDI controler really).
Register on MCCL's webpage to stay tuned (no spam), input much appreciated.
http://groups.yahoo.com/group/mcclive/
Stay safe,
Jajah
wow, just seeing this for the first time. great work. i'm on osx with a fw 1884 myself, so i can't use it quite yet. one thing though: in the last support email i got from ableton, they strongly hinted that there may be mackie control support in the next major update (like a 4.5 or 5.0). i'd hate to see you go to all this work only to have it be obsolete in a few months, but maybe you know more about their progress than i do. good luck nonetheless!
science
science
I'd be VERY happy to see native MC/LC controlers support in Live, as it would hopefully be better than anything I could program as an add-on.
Nevertheless, the time I put in MCCL isn't lost, as :
- a bunch of 01x owners like me have been using it for 6 months already. If it can help others alike for a few more months, I'll be happy.
- while it's not documented or supported atm, I already use MCCL with other apps like Reaktor or Console (yes, I'm a modular systems freak). I will enhance and ease this possibility.
- the concept has led me to other nice tools ideas, not especially targetted at Live or MC/LC controlers, for which I will re-use some of MCCL's design and code.
In short, that's rather good news, I wish some Able can confirm. Meanwhile, I'm going back to my code, so beta 3 is out soon
Nevertheless, the time I put in MCCL isn't lost, as :
- a bunch of 01x owners like me have been using it for 6 months already. If it can help others alike for a few more months, I'll be happy.
- while it's not documented or supported atm, I already use MCCL with other apps like Reaktor or Console (yes, I'm a modular systems freak). I will enhance and ease this possibility.
- the concept has led me to other nice tools ideas, not especially targetted at Live or MC/LC controlers, for which I will re-use some of MCCL's design and code.
In short, that's rather good news, I wish some Able can confirm. Meanwhile, I'm going back to my code, so beta 3 is out soon