Sync between Live and Vinyl/CD ect. (tricky but WORKING!)
sorry, had no time to do some things on this one.
last config for ktdrumtrigger was: no ktdrumtrigger ;) i found out that PeakFreak from tobybear works better.
u can find it here:
http://www.tobybear.de/p_midibag.html
how to configure peakfreak is your way, because it depends on your input level, musicstyle ect.pp (for techno it is useful to take the lower frequencies 60-120 Hz or something else). play a little bit. there is no overall(?) configuration.
maybe you u will get constant tempo all the time, maybe not. i mapped a key to the on/off button of the peakfreak (or the track, dont know at this time). before every change from TT to laptop i activate the plugin/track, wait some seconds, and deactivate it. for 3 of 5 trys, it works.
but if you have enough money, buy the new redsound soundbite micro, which do the same thing in - i think - nearly the same way, with some additions ...
http://www.redsound.com/products/soundbitemicro
last config for ktdrumtrigger was: no ktdrumtrigger ;) i found out that PeakFreak from tobybear works better.
u can find it here:
http://www.tobybear.de/p_midibag.html
how to configure peakfreak is your way, because it depends on your input level, musicstyle ect.pp (for techno it is useful to take the lower frequencies 60-120 Hz or something else). play a little bit. there is no overall(?) configuration.
maybe you u will get constant tempo all the time, maybe not. i mapped a key to the on/off button of the peakfreak (or the track, dont know at this time). before every change from TT to laptop i activate the plugin/track, wait some seconds, and deactivate it. for 3 of 5 trys, it works.
but if you have enough money, buy the new redsound soundbite micro, which do the same thing in - i think - nearly the same way, with some additions ...
http://www.redsound.com/products/soundbitemicro
i use this config:
http://www.labor-3.de/verkabelung.gif
with this one i am also able to record from the decks.
any usb/fw soundcard with extra headphones and 2 I/O should work the same way....
http://www.labor-3.de/verkabelung.gif
with this one i am also able to record from the decks.
any usb/fw soundcard with extra headphones and 2 I/O should work the same way....
... btw, wouldn't SOma Tap TEmpo of any help ?
http://www.asseca.com/soma/
couldn't it replace the Midi clock plugin ?
Cheers
http://www.asseca.com/soma/
couldn't it replace the Midi clock plugin ?
Cheers
-
- Posts: 2255
- Joined: Mon May 29, 2006 10:10 pm
-
- Posts: 1768
- Joined: Thu Apr 07, 2005 9:30 pm
does this work with breaks or hiphop?
ill gates aka the phat conductor
producer, performer + ableton/music teacher
http://www.illgates.com
producer, performer + ableton/music teacher
http://www.illgates.com
-
- Posts: 1743
- Joined: Sun Jul 11, 2004 5:07 am
- Location: Melbourne AU
- Contact:
i'd be surprised if it did... tap seems to recognise 4/4 taps only really. for anything more complicated you're a bit out of luck. the redsound stuff is advertised as working with breaks etc, but in my experience they're not that brilliant for anything non 4/4. they are better than *any* other solution i came across though, and i spent a lot of time about 2 years ago trying to figure this out for a particular project!does this work with breaks or hiphop?
there was some software i found at one point that did realtime beat detection and transmitted midi clock, but the cpu hit was too high for my liking. (it was djdecks if anyones interested, but i couldn't see where it still does this... http://djdecks.be/index.php?module=main) theres also a patch for doing this in VVVV but i haven't tried it. (http://vvvv.org/tiki-index.php?page=syfenx+Patchs)
the other problem is getting the sync tight enough. theres a lot of vj software that does beat detection, but if the videos out by a bit you won't really notice. if your kicks are mixed out though, the crowd'll start laughing!!
Hp Elitebook 2.8Ghz. Live 7.0.14 & Live 8.1.5, XP Pro. and stuff...