Correct settings for Emagic EMI 2|6

puthupa · Post by **puthupa** » Mon Mar 25, 2002 8:35 pm

I've been getting a crackling on the headphone outs. I've been trying to use 1+2 as the master out and 3+4 as the headphone outs. Are there any latency settings I should be aware of that could induce the crackling?

mateo · Post by **mateo** » Mon Apr 01, 2002 8:31 pm

puthupa wrote: I've been getting a crackling on the headphone outs. I've been trying to use 1+2 as the master out and 3+4 as the headphone outs. Are there any latency settings I should be aware of that could induce the crackling?

Since the emi2|6's headphone output is shared with outputs 1+2, you need to use those as your monitor out, and 3+4 as your master out. As for the crackling, it's quite possible that your output is clipping, which live does not handle very well... try putting a compressor or limiter on your master insert.