MackieControl emulator for BCR2000!!

mike holiday · Post by **mike holiday** » Mon Sep 12, 2005 1:20 am

continuous wrote:weird...

maybe try DLing them again ??? or turning the BCR off and on again....really don't know....where are you at in Alaska?...I spent a little time in naknek and tooling around the penninsula on a floating processor! crazy...Alaska a is really amazing place.

best of luck

oh ya...I am on firmware version 1.10 on my BCR.

thanks for the attempt

yup alaska..anchorage now ... girdwood for a while
you mean the kenai penninsula??
nice place but lots of bears!

i really want this to work for me

mike holiday · Post by **mike holiday** » Mon Sep 12, 2005 1:28 am

not working in stand alone mode sending via midi
all thogh the midi lights show activity
and again i am able to send my presets no problam
it seems like the bcr does not accept the transfer

texas_noise · Post by **texas_noise** » Wed Sep 14, 2005 3:30 pm

If you are having trouble loading the .syx, try checking that your in USB1 mode. I am using USB and have Port 1 ON and everything works fine. OSX Tiger, newest firmware on BCR. Love ing this controller!!!! I bought it yesterday on sale at Guitar Center (don't tell anyone i went there). They had it on sale for $119 and then I got the sales guy to know off $10 and billed it as a producer. Out there for $109. Not bad. Wish it wa BUs powered though. Last thing I need is another power cord.
-r

drez · Post by **drez** » Wed Sep 14, 2005 4:51 pm

This is going to force me to buy one. Thank you for the hard work on the preset!

mike holiday · Post by **mike holiday** » Wed Sep 14, 2005 5:14 pm

texas_noise wrote:If you are having trouble loading the .syx, try checking that your in USB1 mode. I am using USB and have Port 1 ON and everything works fine. OSX Tiger, newest firmware on BCR. Love ing this controller!!!! I bought it yesterday on sale at Guitar Center (don't tell anyone i went there). They had it on sale for $119 and then I got the sales guy to know off $10 and billed it as a producer. Out there for $109. Not bad. Wish it wa BUs powered though. Last thing I need is another power cord.
-r

"stamping feet and jumping up and down with fists in the air"

on usb 1 and still not loading.
i can load/downlaod anything else expecpt this file which i'v downloaded 4 times
even tried in stand alone 1 ....

I GOT IT --- i had to change the device id (the one you need to change if chaining bcrs together)

texas_noise · Post by **texas_noise** » Wed Sep 14, 2005 8:40 pm

So everything with the Mackie Control is totally friggin' amazing! I've just reworked an entrie track in just a fraction of the time that I'm accustomed to. Very nice. If only someone would put together a nice .syx for Reaktor 5 ensembles. Maybe I should do it....
I can't seen to get the Effects control to work. Could someone walk me through the selection of a track and then control of effects parameters.
thankyou!
-r

dmc · Post by **dmc** » Wed Sep 14, 2005 11:42 pm

this is very cool.

i'm sure i can sort it by trial and error but is anyone able to describe the controller mapping in detail?

what knobs and buttons map to what MCE functions?

texas_noise · Post by **texas_noise** » Thu Sep 15, 2005 4:21 pm

the download should have had a text file with the functions described. Has anyone got the effects to work properly with this set up?

mike holiday · Post by **mike holiday** » Thu Sep 15, 2005 5:05 pm

texas_noise wrote:Has anyone got the effects to work properly with this set up?

i'm going to start into that today...i'll let you know the results...

texas_noise · Post by **texas_noise** » Thu Sep 15, 2005 6:49 pm

Just downloaded the "another" version and hope this will allow me to store the BCR mackie control as a preset locally on my BCR. Please share your findings with effects control.
thanks! this midi setup is really amazing!
-r

texas_noise · Post by **texas_noise** » Thu Sep 15, 2005 8:03 pm

Has anyone figured out a way to solo/cue with the push encoders? can this be done using the Page>> buttons and assigning new midi mappings in Live?
-r

mike holiday · Post by **mike holiday** » Sat Sep 17, 2005 11:46 pm

wow well this really improves the "import track" function in live 5!!

i just cant find the volume controls for my send chanells..
..of course could just assign them but...anyone figure this one out

continuous · Post by **continuous** » Sun Sep 18, 2005 12:22 am

ignore....

Namihei · Post by **Namihei** » Sun Sep 18, 2005 6:59 am

I came back from the travel today!
I received some requests of "Solo"function.

The way is...

(recommend,duplicate this preset to next or previous preset)
set encoder push note number to "8~15"

Though any function cannot be used.(The button of BCR is not enough)

Namihei · Post by **Namihei** » Mon Sep 19, 2005 5:21 am

This is a new preset.

http://briefcase.yahoo.co.jp/bc/mackicr ... hoo.co.jp/

add "V-Pot" and Jogwheel bug fix

You can control the levels and pans at the same time.
but,V-Pot has no LED
Please use "Flip" well.

The previous version might possibly be better.

MackieControl emulator for BCR2000!!

Make sure Port 1 is "open"

Re: Make sure Port 1 is "open"

Controlling Effects Question

control mapping

Re: control mapping

"another version"

Solo'ing/Cue'ing with push encoders