BCF2000 Edit devices with no programming!
-
- Posts: 3
- Joined: Fri Jan 26, 2007 5:31 pm
Thanks for the great tip djsynchro.
I have just dusted off my bcf2000 and followed your directions with great success, but only when using Live 5. It may be my set up, but is anyone else encountering issues with this process on Live 6?
Is this approach for 5 only and should I go the route of selecting bcf2000 as my remote and doing the "dump" for 6?
Please let me know.
Thanks.
I have just dusted off my bcf2000 and followed your directions with great success, but only when using Live 5. It may be my set up, but is anyone else encountering issues with this process on Live 6?
Is this approach for 5 only and should I go the route of selecting bcf2000 as my remote and doing the "dump" for 6?
Please let me know.
Thanks.
Just got the bcf and about to follow your instruction but question. What do we do if we are on a mac. Dont want to pay $40for the lcxmu do i?
http://www.myspace.com/chemikalrecipe
Ableton live 6, X- session , Axiom 25, Mbp 2.2ghz 2gb ram, BCF 2000, Reason 3, Zebra
Ableton live 6, X- session , Axiom 25, Mbp 2.2ghz 2gb ram, BCF 2000, Reason 3, Zebra
What if i edit on my pc and transfer that to the mac, or am i getting too complex? What i wanted to happen was have the faders set to channels and then with the preset button move them up by a bank of 8 or 1 at a time and i wanted to have a the knobs at the top assiable to pan but to also be easily changed to show say the current volumes etc of a channel. Think this is possible, or am i asking too much ?
http://www.myspace.com/chemikalrecipe
Ableton live 6, X- session , Axiom 25, Mbp 2.2ghz 2gb ram, BCF 2000, Reason 3, Zebra
Ableton live 6, X- session , Axiom 25, Mbp 2.2ghz 2gb ram, BCF 2000, Reason 3, Zebra
BCF LIVE 6
Just got the bcf200 after reading about its capabilities with live. Got the firmware installed etc but having a few problems, can anyone enlighten me;
firstly when I set mackie mode in Midi Sync- the bcf appears as usb2 in both input and output- then I have control over live with the bcf. however if i run bcf view- it makes the "input usb2" go orange and control with bcf is not possible, however I can read the bcf view giving me all my channels in live with pan figures. So basically I can either not have bcf view and control; live with the bcf, or i can have bcf view and not control live with the bcf!!!!!! Have tried uninstalling and reinstalling live view but still no good Im using live 6 xp sp2
firstly when I set mackie mode in Midi Sync- the bcf appears as usb2 in both input and output- then I have control over live with the bcf. however if i run bcf view- it makes the "input usb2" go orange and control with bcf is not possible, however I can read the bcf view giving me all my channels in live with pan figures. So basically I can either not have bcf view and control; live with the bcf, or i can have bcf view and not control live with the bcf!!!!!! Have tried uninstalling and reinstalling live view but still no good Im using live 6 xp sp2
-
- Posts: 1965
- Joined: Fri Oct 26, 2007 3:58 pm
- Location: Nottingham, UK
-
- Posts: 27
- Joined: Mon Jan 08, 2007 7:34 pm
They are not part of the Mackie/Cubase emulation, they just send midi notes, so you can assign them to anything you want. Tap/click/follow are my suggestions, if you want those you need to midi learn them in the usual way (Ctrl-M).captainhanky wrote:I can´t get the second row to work (with black shift), like TAP CLICK FOLLOW ...
any suggestions?
thx
-
- Posts: 15
- Joined: Thu Nov 20, 2008 8:47 pm
Re: BCF2000 Edit devices with no programming!
i like this a lot but hate pressing shift to arm and record... any workarounds?
RonC
RonC
http://theconsolationproject.bandcamp.com
Influenced by The Cure, Smiths, early Verve, My Bloody Valentine, Radiohead, Red House Painters, Cocteau Twins, The Church.
Influenced by The Cure, Smiths, early Verve, My Bloody Valentine, Radiohead, Red House Painters, Cocteau Twins, The Church.
-
- Posts: 366
- Joined: Sun Jun 14, 2009 3:56 am
Re: BCF2000 Edit devices with no programming!
theoretically you can build something like this from scratch exactly as you want itrpc9943 wrote:i like this a lot but hate pressing shift to arm and record... any workarounds?
RonC
in practice, I just use the handy parts of the BCF emulation, and do the rest on the computer keyboard. (like record, hehe)