Hello, I have a question regarding the Live 11 built-in arpeggiator. Whenever I want to play a midi note in the drum rack (with a click with a mouse or pressing a pad on my push 2 regarding the chosen sample, for example a snare, dragged from the drums into one slot of the drum rack) and use the arpeggiator to repeat the note, there is a time delay in the exact length of the beat I’ve chosen in the sync mode of the arp. If I chose for example 1/4 repetitions in the arpeggiator and then press a drum sound in the drum rack, it starts 1/4 note late and then continues to play as it should. Same goes for other tempos, using an arp with 1/1 beat has a time delay of a whole beat before the arped drum sample starts to play. My question is now: is there any way to have my arped sound playing directly when I push the pad or click on it without one 1/4, 1/8etc. Delay?
If tried everything i know, including:
Turning off and on the latency settings in options (this is what was recommended most of the time), changing every quantize setting I found etc.
Also I have to mention that if I don’t use the arpeggiator i don’t have any issues regarding latency on my computer or push. Also, the very same Problem occurs when I use the repeat button of the Push 2! It has the exact same amount of delay, if i use a snare from the drum rack for example and I set the note repeat mode of the push 2 to 1/4, it starts playing 1/4 after pushing the pad.
However, when using the arpeggiator in the piano roll while programming notes, it works. But I want to play live and spontaneously on my push 2 during gigs etc. And really need a properly working note repeat or arp function to create snare rolls without having to fingerdrum all the time, especially with faster rhythms and mixing DJ-like on a controller at the same time it’s hard to manage.
So help me and maybe you can Tell me if there is a bug in Abletons push 2s Note repeat function AND the live arpeggiator or if I can do anything about it.
It noticed this problems again and again searching for a solution in threads here on the Ableton support Forum but nobody could offer a solution which works.
However, I saw two DJs hitting the Pads on the Push 2 without a time Delay so there must be a way!
Cheers,
Nolik
Arpeggiator /note repeat delay
-
- Posts: 1
- Joined: Mon May 01, 2023 10:35 pm
Re: Arpeggiator /note repeat delay
Hey there!
I want to do the same thing with my mpd218 from Akai. or at least it sounds like it ^^
Triggering bassdrum variations while holding down the physical pad of the controller and stopping the variaton when letting go....
Did you come across a solution meanwhile?
thanks in advance!![Wink :wink:](./images/smilies/icon_wink.gif)
I want to do the same thing with my mpd218 from Akai. or at least it sounds like it ^^
Triggering bassdrum variations while holding down the physical pad of the controller and stopping the variaton when letting go....
Did you come across a solution meanwhile?
thanks in advance!
![Wink :wink:](./images/smilies/icon_wink.gif)
Re: Arpeggiator /note repeat delay
I would imagine you should hit the pad ‘slightly’ before the beat? Would be interesting to see how close to on-beat people were triggering these things.
Otherwise, I think with Sync off, you can have it always reset anytime you press the note (not 100% positive). The problem then becomes that your rate is now in milliseconds, which needs to be calculated. And you can’t switch milliseconds to different quantities on the fly.
Otherwise, I think with Sync off, you can have it always reset anytime you press the note (not 100% positive). The problem then becomes that your rate is now in milliseconds, which needs to be calculated. And you can’t switch milliseconds to different quantities on the fly.
-
- Posts: 2
- Joined: Tue Apr 30, 2024 10:12 am
Re: Arpeggiator /note repeat delay
It looks like the Arp is time-quantized, and one should launch the arpeggio in advance (like a clip in a clip view). This makes performing live (like finger drumming) and using Arp for drum rolls impossible, as a live performer is ALWAYS slightly off the grid.
I am considering diving into max4live to build an unquantized note repeat function to solve that issue. TBH, I have never done it before![Very Happy :D](./images/smilies/icon_biggrin.gif)
I am considering diving into max4live to build an unquantized note repeat function to solve that issue. TBH, I have never done it before
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Arpeggiator /note repeat delay
Of course that's the reason. Since time travel is not possible it can't play the note that were supposed to exist before you hit the pad.Michael_Gaidamaka wrote: ↑Tue Apr 30, 2024 10:27 amIt looks like the Arp is time-quantized, and one should launch the arpeggio in advance (like a clip in a clip view).
A beat-based but unquantized option would be useful I reckon... or maybe not, as the offset would maybe become too obvious very quickly since we're talking repetition.
Ableton Forum Moderator