Updated Ableton to 11.3.11 on Standalone, but Push Firmware is still 1.1.11

[Wyrmberg]

Hey!

In the current Release Notes it is stated, that the Push 3 Firmware is updated to 1.3.0 with this latest update.
I did the Update but my Push 3 Firmware is still shown as 1.1.11
Anyone else having that issue? Any fixes?

Jens

[[jur]]

1.1.11 is the last update from today (or was it yesterday?).
But you're right, it was on 1.3.0 just before so things probably got messed up with numbers.
I'm forwarding this to the team.
In any case, that was just a quick update that only added support for the new Native Instruments Komplete Kontrol S Mk3.

[[jur]]

Ok, I'm getting it now.
We're currently beta testing 1.1.20.1
So this quick update actually comes BEFORE it, which means 1.1.11 is the correct version number.
Sorry for the confusion.

Note that the firmware version isn't the same as the Push software version.
Current Push is 1.1.11 (that's what's been updated a couple days ago)
Current firmware is 1.3.0

[Sound Service]

Hi Jur,

My Push Standalone's firmware is 1.0.71 - it's a brand new unit that arrived yesterday and it automatically updated the firmware to 1.0.71.
Is Ableton slowly rolling out the firmware update or have I missed something? (and what can I do about it?)

Cheers,

[[jur]]

There's the Push (software) version, the firmware one and the xmos one (i don't even know what that means). Oh, and the Live version too

The 1.071 is the xmos and should be the latest one according to the L11.3.10 release notes.

If you're up-to-date (if you're not you should see in the Settings > Software that an update is available) you should see in this order:
- "Push 1.1.10" on the top left corner of the Settings > Software below the option "Send stats & reports".
- "Ableton Live 11 standard/suite (11.3.11)"
- "Firmware" which is were you're seeing 1.0.71, right?
etc...

This is all very confusing, the team is aware and will make sure to communicate better about this.

[Sound Service]

Thanks for this! So as far as the technical jargon goes: 1) push software version 2) Ableton Live software version 3) Push firmware version

[mrweasel]

Has anyone tested the Kontrol S MK3 plugged directly into the Push3 Standalone?
I would be curious to test playing the keys with Poly Aftertouch with Push 3's MPE instruments, but haven't had a chance to try that yet.

Powering the Kontrol S MK3 alone may require additional power by plugging a second USB-C cable to a powerbank or a wallwart

[Just_Pierre]

Has anyone tested the Kontrol S MK3 plugged directly into the Push3 Standalone?
I would be curious to test playing the keys with Poly Aftertouch with Push 3's MPE instruments, but haven't had a chance to try that yet.

Powering the Kontrol S MK3 alone may require additional power by plugging a second USB-C cable to a powerbank or a wallwart

Can't answer the question, but I think it's better to open a new post. This has nothing to do with the subject of this post. A new post with a subject covering your question will draw much more attention.

[mrweasel]

ok will do. It's just that I had seen this firmware update or software update (not sure which it is) added support for the Kontrol S MK3