Mackie Control Emulator for KORG microKontrol!!
Mackie Control Emulator for KORG microKontrol!!
You can download here
http://briefcase.yahoo.co.jp/bc/mackicr ... hoo.co.jp/
You need MIDI Yoke,MIDI OX(Windows)
or MIDI pipe(OSX) and microKontrol Editor
Enjoy!
http://briefcase.yahoo.co.jp/bc/mackicr ... hoo.co.jp/
You need MIDI Yoke,MIDI OX(Windows)
or MIDI pipe(OSX) and microKontrol Editor
Enjoy!
-
- Posts: 8803
- Joined: Wed Mar 31, 2004 3:12 pm
- Location: www.fridge.net.au
- Contact:
Sorry,I don't have a BCR.
But,I made a preset for BCR,use with editor.
http://briefcase.yahoo.co.jp/bc/mackicr ... hoo.co.jp/
put this file to
BCEdit > Devices folder
and load a preset
I cannot test it.
Does it works?
But,I made a preset for BCR,use with editor.
http://briefcase.yahoo.co.jp/bc/mackicr ... hoo.co.jp/
put this file to
BCEdit > Devices folder
and load a preset
I cannot test it.
Does it works?
It is very simple.
1.load a MidiPipe(osx) or MIDI ox(windows) preset
Midi Pipe preset : MicroKontrol.mipi
MIDI ox preset : MicroKontrol.oxm
2.load Micro Kontrol preset.
Micro Kontrol preset : MicroKontrol.mks
3.go to Live's preference
MDI/Sync > Control Surface
Control Surface > Mackie Control
Input > Midi yoke out (windows)
or Midi pipe out (osx)
no output
4.happy
1.load a MidiPipe(osx) or MIDI ox(windows) preset
Midi Pipe preset : MicroKontrol.mipi
MIDI ox preset : MicroKontrol.oxm
2.load Micro Kontrol preset.
Micro Kontrol preset : MicroKontrol.mks
3.go to Live's preference
MDI/Sync > Control Surface
Control Surface > Mackie Control
Input > Midi yoke out (windows)
or Midi pipe out (osx)
no output
4.happy
quote: read me file, as translated from Japanese, via google:
"The MicroKontrol is designated coercively as the Mackie Control. Most parameters can be operated without mapping. Is, but when live and the like only the parameter which is limited it does not control, usual MIDI mapping is easier to use, probably will be. Set of attachment uses the port A of the Scene9 - 12. Usage 1. First it downloads the MidiPipe. (Http: The //www.macupdate.com/info.php/id/10541) the MidiPipe is made to start and the MicroKontrol.mipi of attachment is read. You use the 2.MicroKontrol editor and transmit the MackicroKontrol.mks to the MicroKontrol. At configuration of the 3.Live the MIDI/SYNC > the Remote Control Surface Control Surface -> the Mackie Control Input -> it sets to the Midi Pipe Output1. It is completion of preparation with this. First please choose the scene 12 of the MicroKontrol. At problematical point present stage the encoder and the slider transmit the same information. It is not possible to operate the pan and volume simultaneously. It changes with pad 11."
So far I have been able to get panning to work, but not volume. Is there a proper translation of this infromation that I am missing?
"The MicroKontrol is designated coercively as the Mackie Control. Most parameters can be operated without mapping. Is, but when live and the like only the parameter which is limited it does not control, usual MIDI mapping is easier to use, probably will be. Set of attachment uses the port A of the Scene9 - 12. Usage 1. First it downloads the MidiPipe. (Http: The //www.macupdate.com/info.php/id/10541) the MidiPipe is made to start and the MicroKontrol.mipi of attachment is read. You use the 2.MicroKontrol editor and transmit the MackicroKontrol.mks to the MicroKontrol. At configuration of the 3.Live the MIDI/SYNC > the Remote Control Surface Control Surface -> the Mackie Control Input -> it sets to the Midi Pipe Output1. It is completion of preparation with this. First please choose the scene 12 of the MicroKontrol. At problematical point present stage the encoder and the slider transmit the same information. It is not possible to operate the pan and volume simultaneously. It changes with pad 11."
So far I have been able to get panning to work, but not volume. Is there a proper translation of this infromation that I am missing?
-
- Posts: 89
- Joined: Tue Jun 21, 2005 12:07 am
- Location: Berlin
- Contact:
just a quick note,
i noticed that all your pad selection must be done by hitting the pads with a velocity of 127 in order to register a change in the settings.
this is great work by the way. keep it up.
i noticed that all your pad selection must be done by hitting the pads with a velocity of 127 in order to register a change in the settings.
this is great work by the way. keep it up.
|| patrickdsp.com ||
-
- Posts: 130
- Joined: Mon Aug 08, 2005 6:18 pm
kontrol 49 as well?
Hi sounds good but I have a kontrol 49, had a quick go at it but the micro kontrol preset is not reconized, is it possiable with the 49(basically the same as micro k) It's sad we have to patch these shortfalls hurry up ableton!
cheers
cheers
>>CopyRightJustice
O.K.
Challenge it
all scene
all encoders or sliders set to MIDI CC 7
encoder 1: MIDI ch 1,encoder 2: MIDI ch 2,encoder3: MIDI ch 3
.... encoder 8 : MIDI ch 8
all pad set to note and MIDI ch1 and "moment" ,velocity 127
Scene 8 pad note number
pad1~8 :32~39
pad9 :44 , pad 10 :45 , pad11 : 50 , pad 12 :43
pad13 :94 , pad14 :93 , pad15 : 95, pad16 :74
Scene 9~11 note number
pad 1~8 : 0~8 (Arm)
8~15 (solo)
16~23(mute)
pad9 :46 , pad10 :47 , pad11 : 71 , pad12 :100
pad13 :94 , pad14 :93 , pad15 :95 , pad16 :74
Scene12 pad note number
pad 1~8 :24~31
pad9 :46 , pad10 :47 , pad11 :50,pad12 :41
pad13 :94 , pad14 :93 , pad15 : 95 , pad16 :42
Do not forget MIDI ox and control surface settings in Live5
O.K.
Challenge it
all scene
all encoders or sliders set to MIDI CC 7
encoder 1: MIDI ch 1,encoder 2: MIDI ch 2,encoder3: MIDI ch 3
.... encoder 8 : MIDI ch 8
all pad set to note and MIDI ch1 and "moment" ,velocity 127
Scene 8 pad note number
pad1~8 :32~39
pad9 :44 , pad 10 :45 , pad11 : 50 , pad 12 :43
pad13 :94 , pad14 :93 , pad15 : 95, pad16 :74
Scene 9~11 note number
pad 1~8 : 0~8 (Arm)
8~15 (solo)
16~23(mute)
pad9 :46 , pad10 :47 , pad11 : 71 , pad12 :100
pad13 :94 , pad14 :93 , pad15 :95 , pad16 :74
Scene12 pad note number
pad 1~8 :24~31
pad9 :46 , pad10 :47 , pad11 :50,pad12 :41
pad13 :94 , pad14 :93 , pad15 : 95 , pad16 :42
Do not forget MIDI ox and control surface settings in Live5
-
- Posts: 130
- Joined: Mon Aug 08, 2005 6:18 pm