Contact support or Ask other Live users

Push's Foot Pedal Ports

  • Live Versions: 9
  • Operating System: ALL
Ports.png

Push has 2 ports on the back for foot pedals

Push has two foot pedal ports, the first port is for sustain, the second allows for Looper-style control over clip recording:  A single tap triggers Push's record button. A double-tap triggers Push's "New" button.

Pedal_M_AUDIO_SP_1.jpg

Use a footswitch with "normal" polarity with Push

It is recommend to use a foot pedal with "normal" polarity with Push. In other words, (using sustain as an example) depressing the pedal will sustain a note, releasing it will stop sustaining. 

This is the opposite to "reversed" polarity where depressing the pedal will turn off sustain.

If you have a pedal with "reversed" polarity, often holding down the pedal while plugging in the cable, will swap between "normal" and "reversed" polarity, however we recommend checking your accompanying foot pedal manual to clarify this. 

MIDI-Mapping the Second Foot Pedal

When Push is in User Mode (and the MIDI Preferences have been properly configured), the second foot pedal can be freely MIDI-mapped.

 

Related tags: Push